Working Table Dimension | 1220*2440mm |
X Y Z Working Area | 3150*1780*250mm |
Top And Bottom Stroke Of Spindle | 150mm |
Workpiece Height | 100mm |
Max Moving Speed | X axis :60m/min Y axis:60m/min |
Z axis:15m/min | |
Main Shaft Speed | 3000 – 18000rpm |
vacuum Area | four vacuum areas |
High Frequency Spindle Horsepower | 2*6kw |
Vacuum Pumping Horsepower | 10HP(7.5KW)-250m 3 /h |
CNC Controller | Taiwan Syntec System |
Drill Shaft System | 9V Italy FAM |
Drill Shaft Horsepower | 1.5kw |
Rotation Speed Of Drill Shaft | 3200 rpm |
Pitch Of Drills | 32 mm (1.26") |
Drill Shaft Stroke | 70 mm (2.76") |
Software | E- wood software |
1. cnc machining center automatically loads a 4x8 sheet from a pallet by way of a scissor lift located at the rear of the CNC machine.
2. A movable gantry system equipped with suction cups using retractable guide rails and stops on the table safely and accurately guides the material sheet onto the CNC platform.
3. Once the sheet is placed, the vacuum hold down automatically and operator starts the cut cycle for the CNC to execute.
4. After the sheet is fully processed, it is then pushed off to a conveyor table at the front end while another sheet is simultaneously loaded from the rear of the machine again.
5. During this whole process the residual dust or chips that are not picked up from the dust collector are swept off the table and conveyor into various chutes keeping the work cell clear of dust and debris.
6. Upon completion, the individual parts are labeled by the operator through an integrated bar code system. This facilitates clear identification of the finished parts for quick and easy assembly later on.
Details:
1.Heavy Duty
The machine bed is made of 150*300, 150*200 rectangular tube and 10 mm steel plate.
a. High rigidity and high strength.
b. The 20mm steel plate is milled to 10mm
2.X&Y shaft drive adopts Japan SHIMPO Reducer, Germany Henryan High-precision Oblique Gear, with high-speed displacement positioning accuracy, reduce noise, rapid displacement up to 60m / min, smooth and accurate displacement, the maximum machining displacement speed can reach 30m / min .
3.European Certification CE Electric
4.Large Screen Display Interface
High Efficiency:
5. No Intermittent Tool Change
6. One-button Tool Change
7. Production Management System
a. The slab list automatic processing function
b. The system will automatically record the work process. simple and fast
8. Public side, accelerate through
9. Preheating machine
10. No need to return to the origin
a. It does not need to return to the original point for one-button start, direct processing, which can ensure the accuracy, save processing time, improve work efficiency, and the device can work after booting.
b. Power-off breakpoint continuous carving function
11. Vacuuming
There is no dead angle in the dust collecting port, all the wood chips are sucked away
12. Drilling and even hitting, continuous punching, precise hole position, improved processing efficiency.
13. Automatic loading and unloading
![]() |
SHANDONG HICAS MACHINERY (GROUP) CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |